Refine Search
  • Resolution
Refine Search

Alpine BBX-F1200 4-channel power amplifier 4/3/2 channel 600 watts

48% off
Alpine BBX-F1200 4-channel power amplifier 4/3/2 channel 600 watts
Alpine BBX-F1200 4-channel power amplifier 4/3/2 channel 600 watts
Brand: Alpine
  • Alpine BBX-F1200 - 4 Channel Amplifier
  • Amplifier Type: Class-A/B
  • Channel Design: 4/3/2 Channel
  • Total Max Power: 600W
  • Per Channel into 4ohms (≤1%THD+N): 4 x 50W
  • Per Channel into 2ohms (≤1%THD+N): 4 x 70W
  • Bridged into 4ohms (≤1%THD+N): 2 x 130W
  • Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
  • Footprint: 330 mm x 52 mm x 240 mm
  • Weight: 2.7 Kg
Product SKU: ALPINEBBXF1200a
Size (length*width*height): 20cm x 20cm x 20cm
Availability:
Price: RM888.00 RM458.00

This new BBX amplifier gives you Alpine power performance at an amazing price. And they’re designed to fit easily in virtually any system.

High Power, Great Value

This amp delivers high output power and exceptional performance for their class. A great way to expand your sound system on a limited budget.

High Pass and Low Pass Filters

These two filters let you set the frequency points for the high, mid and bass ranges to match your speakers and ensure optimum efficiency.

Bass EQ for Best Bass

Performance With Bass EQ, you can maximise the performance of your system and get even more powerful bass.

FEATURES

Install

  • Terminal Layout: Two-Sided
  • Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals

General

  • Amplifier Type: Class-A/B
  • Channel Design: 4/3/2 Channel
  • Thermal Control: Thermal Management Control
  • Power Supply: DC-DC PWM Power Supply
  • Power Supply Design: MOSFET Power
  • Current Protection: Over-Current, Over-Voltage and Thermal Protection
  • Crossover: Variable Low-Pass / High-Pass
  • Green/red status LED
  • 2 pair RCA pre-inputs

SPECIFICATIONS

Max Power Output Ratings

  • Total Max Power: 600W

RMS Power Ratings

  • Per Channel into 4ohms (≤1%THD+N): 4 x 50W
  • Per Channel into 2ohms (≤1%THD+N): 4 x 70W
  • Bridged into 4ohms (≤1%THD+N): 2 x 130W

Sound Tuning

  • Crossover Frequency (Variable, OFF/LPF/HPF Selectable)
    1/2 Ch: LP/HP:  50Hz – 500Hz
    3/4 Ch: LP/HP:  50Hz – 500Hz
  • EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain  0dB to +12dB (3/4 Ch only)

Dimensions

  • Footprint: 330 mm x 52 mm x 240 mm

General

  • Power Requirements: 14.4 V DC (11 V to 16 V)
  • Input Sensitivity: 0.2 - 8.0 V
  • Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB)
  • Speaker Impedance: 4 or 2 Ω
  • Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 95 dB
  • Weight: 2.7 Kg


1 X Alpine 4 Channel Amplifier BBX-F1200

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good